PRODUCT DESCRIPTION: METAL ADHESION PROMOTER SPRAY

CODE: 80.2000

PROPERTIES AND AREA OF USE: Specific primer to promote the adhesion of paint on all types of metals. For hobby use. Ideal for surfaces where paints have poor adhesion such as copper, brass, galvanized surfaces etc. Promotes protection from oxidation and rust. Quick drying. Weather proof and light resistant. Over-paintable. The 400 ml aerosol can covers an area of 1,5 - 2 m² depending on the color of the surface, the thickness of each layer and number of layers applied.

USE: Use between +10' C and +25' C, max. air humidity 60%. For an optimal effect spray from 20-25 cm away. During use, use appropriate personal protective equipment (gloves, goggles and masks). Clean the surface from grease and dust. After the use, apply the primer-filler base to level the surfaces. Mask the parts not to be treated. Shake vigorously the can for 2 minutes. Make a spray test on a separate surface. Apply in thin layers with several crossed coats, with an interval of 3-5 minutes between one and the other. Do not apply on synthetic paints. Store in a dry place. Protect from direct sunlight and other heat sources. Use only during the dry season, in places protected from the wind, and in well-ventilated environments. Follow the warning texts on the labels.

TECH DATA:
Tinplate spraycan 15 bars
Net content 400 ml
Appearance Spray can with liquid under pressure
Color Different colors
Odour solvent
Density at 20°C 0,75 ÷ 0,80 g/ml
Pressure at 20°C 4,0 ± 0,5 bar
Pressure at 50°C 8,0 ± 0,5 bar
Flash point < 0° C
Viscosity Ford Cap 4 from 11’’ to 12,5’’
Dry residues in the can from 12% to 23,8%
Particle size by grinder from 0 to 2 Micron
Gloss from 85 to 90 gloss
Thickness 2 layers 11 Micron
Thickness 4 layers 32 Micron
Heat resistance 100-120°C
Drying time:
Dust free 10 minutes
Touch dry 20 minutes
Deep dry 24 hours
Patented safety cap "child-proof" with reference to the color in the can