PRODUCT DESCRIPTION: ECO IRON MICA SPRAY

CODE: 50.006

PROPERTIES AND AREA OF USE: High thickness acrylic enamel with iron-mica finish paint with low environmental impact for professional and hobby use. Formulated with 100% biodegradable nonpetroleum solvents used in the food and pharmaceutical industries. Pleasant smell. The safety data sheet shows only the flame pictogram. The special charges allow to obtain an excellent anti-corrosive protection over time and semi-glossy finish. Ideal for treating ferrous surfaces, both new and already superficially affected by atmospheric agents. Ideal for railings, flashes, iron pipes, scaffolding, rain-pipes, doors etc. The 400 ml aerosol can covers an area of 1,5 - 2 m² depending on the color of the surface, the thickness of each layer and number of layers applied.

USE: Use between +10' C and +25' C, max. air humidity 60%. The surface to be painted must have the same temperatures, to avoid adhesion and finishing problems. For an optimal effect spray from 20-25 cm away. During use, use appropriate personal protective equipment (gloves, goggles and masks). Clean the surface from grease and dust. Remove any rust from metals. In case of use on plastic use previously the plastic primer. For higher adherence to aluminum, use the metal adhesion promoter beforehand. Use the primer-filler base beforehand to level the surfaces. Mask the parts not to be treated. Shake vigorously the can for 2 minutes. Make a spray test on a separate surface. Apply in thin layers with several crossed coats, with an interval of 3-5 minutes between one and the other. Do not apply on synthetic paints. Store in a dry place. Protect from direct sunlight and other heat sources. Use only during the dry season, in places protected from the wind, and in well-ventilated environments. Follow the warning texts on the labels.

TECH DATA:
Tinplate spraycan 15 bars
Net content 400 ml
Appearance Spray can with liquid under pressure
Color Different colors
Odour solvent
Density at 20°C 0,75 ÷ 0,80 g/ml
Pressure at 20°C 4,0 ± 0,5 bar
Pressure at 50°C 8,0 ± 0,5 bar
Flash point < 0° C
Viscosity Ford cup 4 from 12’’
Dry residues in the can from 19% to 22,2%
Particle size by grinder from 8 to 23 Micron
Gloss from 7 to 45 gloss
Thickness 2 layers 25 Micron
Thickness 4 layers 50 - 60 Micron
Heat resistance 100 – 130°C
Drying time:
Dust free 10 minutes
Touch dry 20 minutes
Deep dry 24 hours
Patented safety cap "child-proof" with reference to the color in the can